Exterior stickers for LED display to bring advantages

Exterior stickers for LED display to bring advantages

Now when installing LED display screen, a lot of friends will adopt door appearance stick way. Today let's take a look at the advantages of exterior stickers for LED displays.

1. Wide viewing Angle: the full-color screen attached to the exterior of the house not only has a wide viewing Angle of more than 110 degrees in the horizontal direction, but also has a wide viewing Angle of more than 110 degrees in the vertical direction. This has special advantages in some application sites, such as the building screen, outdoor LED display screen suspended in the high altitude needs a wider viewing Angle to display better advertising effect.

2. With good light: red, green, and blue oval LED brightness in three different perspectives on the matching of consistency is a highly difficult index, and full color SMD because design structure for the triad structure, three red, green, and blue chip in the bowl of a stent, in different point of view of red, green, blue three kinds of brightness matching consistency highly consistent, so as to make the outdoor full-color table stick piece to the brightness of the LED display in any Angle consistency is very good, get better vivid effect.

3. Good light mixing: as the design structure is three-in-one, three chips are very close to each other, mixing light in the same bracket bowl rather than three discrete elliptic leds, the red, green and blue light mixing effect is better than directly inserted elliptic LED screen, especially suitable for close viewing.

4. High contrast: due to the three-in-one design structure and the small size of full-color SMD, the luminous area is small and the black area is large, which improves the contrast of LED display screen.

5. Automatic production: table stick LED can use automatic mounter for automatic mounter, high production efficiency. The circuit design of LED household external display panel module can realize the combination of lamp board and drive board, which reduces the cost, improves the reliability and improves the production efficiency. In addition, automatic placement production can improve the vertical precision of SMD on circuit board, and overcome the problem of vertical precision of direct-inserted elliptical LED on circuit board, so as to ensure better optical effect.

6. Light weight: aluminum alloy box structure design is very light; And beautiful not easy deformation assembly convenient and flat. Suitable for rental companies, car screen, mobile media use; Column installation or wall installation can reduce the pressure of the screen on the steel structure.

7. Avoid glue: traditional outdoor screen module filling colloid in weathered and gradually under the irradiation of ultraviolet ageing, colloid properties change after will be split off, lost protective layer makes the circuit board and LED, even after a long time to reach the waterproof effect after the heat from the cold, and glue can slip into the screen body, have a corrosion effect on PCB, affecting the service life of the whole screen and stability; If it is the table paste outdoor three in one use of pouring adhesive technology, because its lamp foot is too short, pouring adhesive is too thin, the consequences are more serious.

These are the advantages that exterior stickers bring to LED displays, and it's for these reasons that so many people like them now.